Communicate with Supplier? Supplier
Raffaele Mr. Raffaele
What can I do for you?
Contact Supplier
 Tel:86-0750-6409098 Email:raffaele@ylseiko.com
Home > About Us > Our Technology
Our Technology

Forging Non-Standard Hard Ware

Forging refers to the red-hot metal is pressed and formed by the pneumatic mallet or other equipment. Forging can keep the continuity of the metallic structure and consistency of outline.

Here is our forging technological process

THE FIRST STEP, get the drawing or sample from our client.

THE SECOND STEP, our technical department would make the assessment for the material, mould, price and other technology.

THE THIRD STEP, after the confirmation form the client, we will prepare the mould and cut material piece by piece as the drawing.

THE FORTH STEP, putting the cutted material into the fire, till they had been red-hot. Then putting the red-hot material into the mould inside the forging machines. Last, the pneumatic mallet will press the material as the mould.

THE FIFTH STEP, putting the product into the Deflashing equipment for Deflashing.

THE SIXTH STEP, Putting the product after Forging and Deflashing into the Sandblasting Machine for increasing the thickness and roughness of the finished product.

CNC Processing Non-Standard Hard Ware

Here is our CNC technological process

THE FIRST STEP, after getting the processing confirmation from our customer, we will send the raw material list to our material supplier, at the same time we will check the stock of the raw material.

THE SECOND STEP, our engineer will make the explanation about the processing on the drawing.

THE THIRD STEP, after finishing the preparation of the raw material, we will make the rough machining. Then we will reserve the machining allowance as the drawing requirement.

THE FOURTH STEP, make the heat treatment or precision machining for finishing the parts.

Rough Machining Non-Standard Hard Ware

THE FIRST STEP, make the confirmation with our client for the drawing.

THE SECOND STEP, after the drawing confirmation, we will cut the raw material brass piece by piece.

THE THIRD STEP, adjust and test the mould inside the machine as the drawing shown.

THE FOURTH STEP, make the machining by rough machining machines for the product after the forging or CNC.

Related Products List

Home

Phone

Skype

Inquiry